Archived Message
Seat removal
Could anyone please tell me how to remove the 2 front seats in my RV8. I can see 2 bolts at the front with a star shaped design in them, so presume I need a special tool, but I cannot see where they are fastened at the back. I am used to 4 bolts on my MGB's, but the RV8 is puzzling me and I am new to ownership. I have bought a manual(CD) but cannot find anywhere that refers to seat removal! Thanks in anticipation.
Gordon Russell
13/06/2012 @  11:05
Under topic: RV8
 
Archived Reply(ies) received for this Message
Seat removal
Removing the seats is really quite easy except for the fact that the manual is wrong in the way one goes about it! Take a look at RV8 Workshop Notes Vol. 5 note 139. You remove the two torx T40 bolts from the front first then slide the seat right forwards and remove the rear ones. There are two sliders which also can be slotted out. If you try to to reverse this procedure you will find that one cannot get at the rear bolts because the sliders prevent this!
Peter Garton
13/06/2012 @  20:32
 
Seat removal
Yup, as per Peter's post except to say that every time you find a torx head bolt throw it in the bin and replace with a good old fashioned hex hed of a suitable grade if you possibly can. Nasty horrible things those torx fittings - they always round off just at the moment you don't want them to, particularly the little ones! These cars are knocking on the door of 20 years old now and every remaining example has long exceeded it's originally intended life span. It's only going to get harder to take them apart as the years tick by so makes sense to make things easy for yourself the next time around.
JC Moulds
13/06/2012 @  21:03
 
Seat removal
Thanks for invaluable information. I'm not mechanically minded, but usually can follow basic instructions so I think I should be ok with this task thanks to your guidance. Love driving her though!!
Gordon Russell
13/06/2012 @  21:36
 
Advanced Search
Search for all messages for
Last 2 days
Last 7 days
Last 14 days
All Messages
Search by key word
Search by topic
V8 RV8
Spares Events
MGCC BCV8
General Online auction
Include archived messages in search
When making a posting
do note the system automatically signs off your posting with your name

You are welcome to post a message
or response
It could be a technical query or clarification, a maintenance or spares tip, a report of good service from a V8 specialist, or news of an event of interest to fellow V8 enthusiasts. As we welcome new members, this service is provided on a "free and open to all" basis and is not restricted by password access.

Spares adverts
Any spares or other items advertised for sale on the V8BB will be removed and posted on the V8 Spares webpage on the V8 website.
More

V8 Bulletin Board aims
to attract good quality postings in terms of content subject matter and accuracy. It is not a chat box so any "grumping or flaring" or other undesirable postings will be moderated at the sole discretion of the V8 Webmaster and V8 Chairman. Periodically the postings are archived to keep the list of postings to a manageable length. Please disclose your name and email address when preparing your posting.

V8 Register - MG Car Club
 
Neither the MG Car Club, the V8 Register or its officers and committee members can accept legal responsibility for any of the statements contained in any posting or postings made on this bulletin board. Any material considered to be undesirable in terms of its nature, content or implication will be moderated as promptly as is reasonably possible. Should any party feel the content or claims in any posting may cause them actual or potential damage, please contact the V8 Webmaster promptly so appropriate action may be taken.

V8 Webmaster