Archived Message
Revving Issues
I use the RV8 for my daily drive to work and noticed, particularly in the mornings, when driving off and the clutch is engaged that the engine 'pulses' from 5 rpm to around 10-12 rpm. It also happens when the car is stationary as expect steady rev at just under 5 rpm - it does however resolve itself. Does anyone have any ideas what is causing this and, more importantly should I be concerned?

Also can anyone recommend a good garage in Scotland, preferably central belt, who knows the RV8? Thanks,
Stephen Aitken
04/09/2012 @  17:38
Under topic: RV8
 
Archived Reply(ies) received for this Message
Revving Issues
Do a search for ‘stepper motor’ on the home page Stephen; it gets blamed for a lot of things but it probably is the cause of the fault you have. Remove it and clean it, simple job and no need to take the car to a garage.

Despite living in Scotland for 30 years I can’t help with an RV8 garage; my car never went to one.

By the way that will 500 to 1,000/1,200 revs – the engine won’t run at 5rpm. 500rpm at idle is too slow which makes me think the stepper motor is sticky.
Geoff King
05/09/2012 @  02:58
 
Revving Issues
Stephen,
I have sent an email to four V8 members in the Caledonian Centre - David Reid, Mike Howlett, Peter Jung and Robert McGillivray - and feel that between them they should be able to steer you to a garage with experience with an RV8 in the Central Belt. That email has been copied to you. Other RV8 enthusiasts in Scotland may also have recommendations too.

There is Dreadnought Garage up at Callander north west of Stirling so that is further north. Their website is at: http://www.dreadnoughtscotland.co.uk/
V8 Webmaster
05/09/2012 @  04:51
 
Revving Issues
Try Rv8 workshop note vol 9 no.283.
There is also fairly comprehensive information on:
www.g33.co.uk/fuel_injection.htm
This is only additional information and I would suspect it would not apply in its entirety to the RV8 but makes intersting reading. You will have to scroll down a fair way to get to the relevant paragraphs, though!! I had mine done and it was easy to remove and clean up.
Peter Garton
05/09/2012 @  14:52
 
Advanced Search
Search for all messages for
Last 2 days
Last 7 days
Last 14 days
All Messages
Search by key word
Search by topic
V8 RV8
Spares Events
MGCC BCV8
General Online auction
Include archived messages in search
When making a posting
do note the system automatically signs off your posting with your name

You are welcome to post a message
or response
It could be a technical query or clarification, a maintenance or spares tip, a report of good service from a V8 specialist, or news of an event of interest to fellow V8 enthusiasts. As we welcome new members, this service is provided on a "free and open to all" basis and is not restricted by password access.

Spares adverts
Any spares or other items advertised for sale on the V8BB will be removed and posted on the V8 Spares webpage on the V8 website.
More

V8 Bulletin Board aims
to attract good quality postings in terms of content subject matter and accuracy. It is not a chat box so any "grumping or flaring" or other undesirable postings will be moderated at the sole discretion of the V8 Webmaster and V8 Chairman. Periodically the postings are archived to keep the list of postings to a manageable length. Please disclose your name and email address when preparing your posting.

V8 Register - MG Car Club
 
Neither the MG Car Club, the V8 Register or its officers and committee members can accept legal responsibility for any of the statements contained in any posting or postings made on this bulletin board. Any material considered to be undesirable in terms of its nature, content or implication will be moderated as promptly as is reasonably possible. Should any party feel the content or claims in any posting may cause them actual or potential damage, please contact the V8 Webmaster promptly so appropriate action may be taken.

V8 Webmaster